The etrailer E-Track Roller Idler #e67HR is 3" from the top of the e-track to the bottom of the roller.

With an EZ-Lube or Posi-Lube axle, you do not have to take apart the hubs to re-pack the bearings. You are absolutely correct that all you need to do is use the grease zerk and add LubriMatic LMX Industrial Strength Grease #L11390 or LubriMatic…

I reached out to my contact at CE smith. I was told that the CE Smith Outrigger Poles #CE56510 weigh 5 lbs apiece.

Yes, The Bearing Buddy #BB2717SS will be the correct size for hubs with the 2.72" dust caps. This is a fairly common size found on 5,200-lb to 7,000-lb rated axles.

All of our regulators like the MB Sturgis Vertical 2-Stage Propane Regulator #108220 are going to come from the factory preset at 11" water column for pressure. This particular regulator like most is adjustable so you will be able to get to…

Yes, the #100019-24 pigtail can be used to connect your dual-cylinder 100 lb propane setup to the regulator on your RV. Since this hose does not have a back-check to contain a gas leak, you will need the #204120-MBS fitting that includes a…

The Flint Hill Goods 30" x 50" Wheelchair Carrier w/ 60" Ramp #FHG99ZR weighs about 42 lbs.

The AO Coolers Fish Cooler Bag #AM57NR weighs 18-lbs. This cooler bag also measures 7" long, 48" wide, 26" tall and is reinforced with 1" thick foam.

You can expect the installation of the #C59236 in the 2023 Palisade video to be almost identical to your 2022 Hyundai Tucson. I'm not sure if the tail light style varies so removal may be a little different but the rest will be the same.

I have a solution for you, but the Viking Solutions Rack Jack #310-VMH001 hoist is secured via bolt on to the lower tube and there are no additional mounting holes on that lower tube it without voiding any warranty or compromising the integrity of…

For your 2005 Toyota Tundra I recommend the Brophy Stake Pocket Mounted Camper Tie Downs #TDSF. These particular tie-downs will mount right to the truck's stake pockets instead of having to clamp them around the bed rails like the other…

I hope I got the right measurement for you Roberto. I included a image with the measurement points that I took on the CargoBuckle Ladder Rack Straps #CB32MR below. If you are needing a different measurement please let me know.