Does the Heat Shield Have to Be Removed to Install the Curt C23HR on a 2021 Hyundai Sonata?

Question

Question:

I was looking at Hitch for 2021 Hyundai Sonata SE. I saw vidoes on youtube for earlier models 2019/2016 where the heat shield was reinstalled. However, it seems for 2021, heat shield is permanently removed. Can you Please confirm this? If true, do you know the effect of removing heat sheild?

asked by: Sanket J

0

Expert Reply:

I can confirm that the heat shield will have to be removed to install the Curt Trailer Hitch item # C23HR on your 2021 Hyundai Sonata. The heat shield mounts on the frame where the trailer hitch will sit so it has to go. I have attached a screenshot below from the instructions so you can see this step.

All the heat shield does is block the heat from the muffler. Once the hitch is in its place the steel does a far superior job of keeping exhaust heat away from your car.

If you are planning on towing you will also need a wiring harness item # C44WR and the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball.

expert reply by: Jerred H

0

Heat Shield Removal
(click to enlarge)

Answer 1

The best hitch for your 2023 Hyundai Sonata is going to be the Draw-Tite Trailer Hitch item #DT74MR. This hitch is custom fit and bolts to your Hyundai with included hardware. This is a class I hitch with a 1-1/4" receiver. It has a 2,000 lbs…

view full answer...

Answer 2

The Curt trailer wiring harness part #C56331 will not work properly without the power wire hooked up. This harness uses the taillight circuits of your vehicle as signal wires but then draws all the power for the trailer taillights from the vehicle…

view full answer...

Answer 3

We do have one hitch available for your 2023 Hyundai Sonata Limited Hybrid. That is the Draw-Tite Sportframe #DT74MR. This Class I hitch has a 1-1/4" receiver and bolt-on installation. It has a maximum gross trailer weight of 2,000 lbs and max…

view full answer...

Answer 4

I would be happy to help you find a hitch receiver and a bike rack that fits your 2022 Hyundai Sonata. I recommend the Draw-Tite Sportframe Trailer Hitch Receiver item #DT74MR. This is a custom fit hitch that bolts directly to your Sonata's frame…

view full answer...

Answer 5

Yes it does; per the manufacturer the correct Draw-Tite trailer hitch that fits your 2023 Hyundai Sonata hybrid is the following: - Draw-Tite Sportframe Trailer Hitch Receiver #DT74MR

view full answer...

Answer 6

You will want to replace your backup battery with another 1250 5 amp/hr battery. This will ensure you get the correct size to fit inside your battery case. We currently have the 3 options. Hopkins #HM20008 Curt #C52023 Bright Way #3801250

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

We haven't had a chance to install the Draw-Tite Hitch #DT74MR on a 2021 Hyundai Sonata Hybrid as of yet but the heat shield does need to be removed in order to gain access to the mounting holes for the hitch bolts. If you don't already have…

view full answer...

Does the Heat Shield Have to Be Removed to Install the Curt C23HR on a 2021 Hyundai Sonata?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching