Customers compare PD4135K to these similar products
Products Featured in this Video
Ellen: Hey everybody. I'm Ellen here at etrailer.com, and we're going to take a quick look at the Progressive Dynamics RV Power Control.This has an AC/DC panel with a converter and also a smart charger, so that combines a lot of items into one small package so you're not having to install a bunch of different things, take up a lot of room. And… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Yes, all you'll need to do is disconnect the three wires running from the converter section in your Progressive Dynamics 4100 #PD4135K from the AC distribution panel (circuit breaker, ground bus bar, neutral bus bar). This will cut the…
view full answer...The black wire you have shown is power for the converter that's built inside the Power Center #PD4135K. You'll need to wire it to a 15 amp circuit breaker on the AC side of the power center.
view full answer...In one way or another, the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger part #PD4135K is grounded to the chassis although it's a bit different for the AC and DC side. I have attached for you below…
view full answer...The white wire on the back of the Progressive Dynamics 4100 Series RV Converter #PD4135K just needs to be ran to the negative terminal on the battery.
view full answer...The Progressive Dynamics 4100 Series RV Converter w/ Charge Wizard and AC/DC Distribution Panel #PD4135K is going to wire in the following fashion: On the front of the unit you'll have a green, white, and black wire. The green wire will connect…
view full answer...The Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger - 35 Amp, #PD4135K, requires cutout dimensions of 10-1/4" long x 7" tall. Please compare this to your current installation for fitment. I suggest…
view full answer...WF-8735P is a 35-amp panel model. To upgrade to a lithium ready system you will need the Progressive Dynamics #PD4135K Converter/Smart Charger rated for 35-Amp. this system includes a high voltage output to provide full, quick charge for your lithium…
view full answer...Yes, the red wires of the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger - 35 Amp #PD4135K are going to be labeled with a 3-digit code with 001 being the wire for your battery's positive post and 002…
view full answer...The Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger - 35 Amp #PD4135K uses a 30 amp main breaker and 20 amp branch breakers, as you can see by the cut out of the linked directions I added.
view full answer...According to Progressive Dynamics, with the 35 amp Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger #PD4135K you will need 8 gauge wire. I have added a link to a video review for you to check out as well.
view full answer...There is no need to install an inline fuse between the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger - 35 Amp item #PD4135K. The system includes a number of safety features. It has a reverse polarity…
view full answer...If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.
view full answer...