Customers compare 288-07432-2 to these similar products
Products Featured in this Video
Speaker 1: Today we're gonna be taking a look at the arch centerfold aluminum loading ramp. Part number is 288-07432. For two, use part number 288-07432-2. Now the arch ramp set's designed to help us load and unload equipment. With a pair that's gonna work out really well for your ATVs, your UTVs, golf carts, or any other form of motorized equipment like lawn mowers or snow blowers. When… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The longest folding ramps we have for you is the Arched Loading Ramp Set part #288-07432 for 1 or part #288-07432-2 for 2 which are 90" long. The 90" length will ensure the angle that will be required to load the generator in your truck bed…
view full answer...For most golf carts you want to go with a 1,000 lb capacity loading ramp. I would however recommend the Erickson Arched Ramps part #EM07486 as they have a 3,000 lb capacity, an aluminum construction which will make them lightweight, and straps that…
view full answer...What will help prevent the bottoming out is a ramp set that is longer and has a bit of an upward bow like the #288-07489 has. Without knowing the length of your current ramps I can't say if these would be an improvement in that area. These are 65…
view full answer...The Stallion Loading Ramp Set #288-07489 will sit on top of the barn floor and with the approximately 4" of clearance the deck has in the lifted position on your Big Dog Alpha MPX mower you shouldn't have an issue with it catching.
view full answer...We have ramps that will work perfectly for loading your 1690lb UTV into the bed of your truck. I recommend the Arched Loading Ramp Set #288-07432-2 which is 90" long x 18" wide and has a combined weight capacity of 3000lbs. The included…
view full answer...The Stallion #288-07432-2 folding cargo ramps are manufactured in China. If you'd prefer a US made alternative, I'd recommend the Gen-Y #325-GH-R84 84 inch long aluminum loading ramps. If you click the provided link, you can see a product…
view full answer...Yes, there is. It is the Gen-Y Hitch Hitch Extender for 2" Trailer Hitches item #GY89SR which is actually 14" long. This fits a 2" receiver, has a 500 lbs tongue weight, and a 10,000 lbs maximum towing capacity. This extender, like all…
view full answer...I have a solution for you, but unfortunately the Arched Loading Ramp #288-07432-2 set have a maximum safe height of 35", so they would not work for your 37" tall truck bed. You may want to try the Erickson Arched, Aluminum Loading Ramp Set…
view full answer...I confirmed with Stallion that the thickness of the Arched Loading Ramp Set - Center Fold - Aluminum #288-07432-2 when stacked on top of each other is 6 inches when folded at the center.
view full answer...We do! There are a variety of trailer ramp styles and needs out there so we have quite a selection to choose from. For example, we have the 60" x 14-1/2" Aluminum Car Hauler Ramp Set #288-07502 rated for 6,000 lbs, the 84" x 14"…
view full answer...I actually really like the Arched Loading Ramp Set #288-07432-2 you're looking at. Together these ramps can handle up to 3,000 lbs, and they measure 18" wide which should work out really well for your Gator. We actually have a review where…
view full answer...Trailers tend not to have a suspension that travels 8 or more inches, which is the amount of lift provided by the Rapid Jack #AM3620. If the axles are far enough apart or the ground is not level it could be an issue though. That's why its tough…
view full answer...