Customers compare LCV000334343 to these similar products
Products Featured in this Video
How's it going Ryan here at etrailer.com. Today, we're going to be taking a look at the line of Solera Replacement Awning Fabric. Keep in mind the awning fabrics are going to be available in a variety of different sizes and color combinations. So just see etrailer.com for your specific needs. To find the particular size that you're going to need you're going to measure from the center of your arm,… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The correct replacement awning fabric you need is part #LCV000334419. This is a solid black, 18' x 8' fabric, designed for a roller assembly. We also carry replacement arms for a Dometic awning which I am linking for you to filter…
view full answer...I went ahead and double checked to be sure, and yes the 7-Piece Installation Set for Bearings, Races, and Seals #PTW83020 you mention will work with your Timken bearings, races, and seals. If you don't have grease yet, you're also…
view full answer...There is a difference in the thickness of the material used to build the center sections for the Reese M5 #RP30918 and Reese M5 #RP37FR as well which as the additional bolt in the 27k.
view full answer...The bearings can be tapped into place but it is a great idea to use a tool to make sure it is done correctly. The tool we offer is part #PTW83020. This includes six discs that will work with common bearing sizes. They are 1.565",…
view full answer...If your current awning is a 16 foot awning you can use this replacement #LCV000334402. This is compatible with Solera, Dometic A&E, and Carefree of Colorado awnings. Dometic A&E make the Sunchaser Awning Model #834AV18.401
view full answer...The part of a hub/drum assembly that makes contact with the electromagnet, the armature surface, cannot be machined. If the surface is deteriorated you'd do well to replace that hub. The link provided will show you all hub/drum assemblies which…
view full answer...The Dexter Trailer Brake Assemblies 023-476-00 will cross-reference to our Dexter Electric Trailer Brake Kit part #K23-472-473-00.
view full answer...Yes the Solera 19' Replacement Awning Fabric #LCV000334429 will work as replacement fabric for the Dometic awning you have installed on your RV.
view full answer...After speaking with out expert install team I would NOT recommend patching or replacing only part of the membrane. It will just set you up for future leaks and other problems where the seam will be. Since you will have to remove the trim around the…
view full answer...It sounds like your problem may be that you are installing too much grease into the hubs and that is why they are blowing out. If you are pumping your grease into your hub with a grease gun you should note that you should only continue to add grease…
view full answer...As long as your spindles are 4.75 inches from seal to threading like #TRU24FR or #TRU57FR they are compatible. I've attached a photo to assist. You will be able to use the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right…
view full answer...The closest thing we have to your jacks are the Ultra-Fab Ultra Scissor Jacks - 24" Lift - 6,500 lbs - Qty 2 #UF48-979002. These are BAL jacks that have a restricted height of 4-3/4 inches and an extended height of 28-3/4 inches. I've…
view full answer...